INCH-POUND
MIL-DTL-12216D
24 October 2007
SUPERSEDING
MIL-R-12216C
20 December 1971
DETAIL SPECIFICATION
REFLECTOR, LIGHT: ALUMINUM, AND SHIELD, LIGHT:
TELESCOPING, ALUMINUM
Inactive for new design after 11 August 1992
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1.
Scope
1.1 This specification covers a parabolic aluminum reflector and a collapsible
aluminum shield for use on incandescent electric lamps.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of
this standard. This section does not include documents cited in other sections of this
standard or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that
they must meet all specified requirements of documents cited in section 3, 4, or 5 of this
standard, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or email to dscpg&inspecomments@dla.mil. Since contact information
can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil/
AMSC N/A
FSC 6210
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business