MIL-DTL-25971C
DEPARTMENT OF DEFENSE SPECIFICATIONS
MS3102
- Connector, Receptacle, Electrical, Box Mounting,
Solder Contacts, AN Type
MIL-DTL-7989
- Covers, Light-Transmitting, for Aeronautical
Lights, General Specification for
MIL-DTL-14072
- Finishes for Ground Based Electronic Equipment
MIL-PRF-24712
- Coatings, Powder (Metric)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
- Identification Marking of U.S. Military Property
MIL-STD-810
- Environmental Engineering Considerations and
Laboratory Tests
MIL-STD-889
- Dissimilar Metals
MIL-STD-1916
- DOD Preferred Methods for Acceptance of Product
DEPARTMENT OF DEFENSE HANDBOOK
MIL-HDBK-831
- Preparation of Test Reports
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.2.2 Other government documents, drawings, and publications. The following other
government documents, drawings, and publications form a part of this document to the extent specified
herein. Unless otherwise specified, the issues are those cited in the solicitation or contract.
FEDERAL AVIATION ADMINISTRATION
FAA-E-2214
- Gun, Signal Light, Portable
Drawings D-5056-1
- Portable Signal Light Gun, Type W-1
through -12
(Copies of these documents are available from the Federal Aviation Administration, 800
Independence Avenue, SW, Room 700W, AJW-281, Attn: NAS Documentation Control Center
(DCC), Washington, D.C. 20591.)
2.3 Non-government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
ASME
ASME Y14.100
- Engineering Drawing Practices
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business