MIL-DTL-25971C
(Copies of this document are available online at https://www.asme.org/ or from ASME, Three
Park Avenue, New York, NY 10016-5990.)
SAE INTERNATIONAL
SAE AS25050
- Colors, Aeronautical Lights and Lighting
Equipment, General Requirements for
SAE AS5756
- Cable, Power, Electrical, Portable General
Specification for
(Copies of these documents are available from https://www.sae.org/ or from SAE International,
400 Commonwealth Drive, Warrendale PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials.
3.2.1 Fungus-proof materials. Materials that are nutrients for fungi shall not be used
where it is practical to avoid them. When used and not hermetically sealed, they shall be treated
with a fungicidal agent acceptable to the procuring activity. However, if they will be used in a
hermetically sealed enclosure, fungicidal treatment will not be necessary.
3.2.2 Metals. The metals shall be as specified herein. Unless otherwise specified,
metals shall be of the corrosion-resistant type or suitably treated to resist corrosion due to fuels,
salt spray, atmospheric conditions or chemical reaction when installed. The use of dissimilar
metals shall be avoided where practicable. When used, dissimilar metals shall be in accordance
with MIL-STD-889.
3.3 Design and construction. The light shall be designed and constructed in accordance
with FAA Drawings D-5056-1 through -12, and shall provide equivalent performance to the light
specified in FAA-E-2214. The light shall be designed to be held, aimed, and operated with one
hand.
3.3.1 The light shall be constructed to withstand the strains, jars, vibrations, and other
conditions incident to shipping, storage, installation, and service. The light shall be so
constructed that any necessary repairs or maintenance can be readily made by the personnel of
operating units or overhaul bases without the use of special tools.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business