MIL-DTL-52007D
4. VERIFICATION
4.1 Component and material inspection. Components and materials shall be inspected in
accordance with all the requirements specified herein and in applicable referenced documents.
4.2 Classification of inspections. The inspection requirements specified herein are classified as
follow: Conformance inspection (see 4.3).
4.3 Conformance inspection.
4.3.1 Sampling. Sampling for examination and inspection procedures shall be in accordance
with ASQ Z1.4, Inspection Level I. Unless otherwise specified, the Acceptable Quality Levels
(AQLs) listed in this section shall be used to established the sample size, however, the
acceptance number shall be zero.
4.3.1.1 Examination. Mounting adapters selected in accordance with 4.3.1 shall be examined for
the characteristics listed in Table 1. AQL shall be 2.5 percent defective for major defects and 4.0
percent defective for minor defects.
TABLE 1. Examination Schedule.
Number
Characteristic
Requirement
Paragraph
Critical
None defined
Major
101
Dimensions that affect form, fit, or function.
3.1
102
Material not as specified.
3.2
Minor
201
Dimensions that do not affect form, fit, or function.
3.1
202
Identification markings not in accordance with MIL-STD-130.
3.3
203
Workmanship not as specified.
3.4
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When packaging of material is to be performed by DoD or in-
house contractor personnel, these personnel need to contact the responsible packaging activity
to ascertain packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activities within the Military Services or Defense Agency, or within the
military service's system commands. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is
not mandatory.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business