INCH-POUND
MIL-DTL-8954C
24 October 2006
SUPERSEDING
MIL-B-8954B
17 September 1970
DETAIL SPECIFICATION
BASE AND ACCESSORIES, AIRPORT MARKER LIGHTS,
GENERAL SPECIFICATION FOR
Inactive for new design after 24 October 2006
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 This specification covers the general requirements for bases, base plate assemblies, adapter
plates, covers, frangible couplings, cable clamps, and gaskets used to install airport semiflush and
elevated lights.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5
of this standard. This section does not include documents cited in other sections of this standard or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Ave, Philadelphia, PA
19111-5096 or emailed to dscpg&ispeccomments@dla.mil. Since contact information
can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil/
AMSC N/A
FSC 6210
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business