MIL-R-52000C(ME)
103. Poor appearance of welds (porosity, flux inclusions, excessive spatter, undercutting, lack of fusion with apparent metal or between joints.
104. Treatment and painting not as specified.
Minor
201. Identification marking missing, incomplete, or not legible.
4.4.2 Test. Reels shall be loaded with 100 pounds of cable and then lifted axially by the rim from two diametrically opposite sides. Permanent deformation to any part of the reel shall constitute failure of this test.
4.5 Inspection of packaging.
4.5.1 Quality conformance inspection of pack.
4.5.1.1 Units of product. For the purpose of inspection, a completed pack prepared for shipment shall be considered a unit of product.
4.5.1.2 Sampling. Sampling for examination shall be in accordance with
MIL-STD-105.
4.5.1.3 Examination. Samples selected in accordance with 4.5.1.2 shall be examined for the following defects. AQL shall be 2.5 percent defective.
105. Materials and containers not as specified for Level A or B. Each incorrect material or container shall be considered on defect.
106. Reels of unlike description packed together for Level A or B.
107. Reels not secured within the box to prevent movement or damage for
Level A or B.
108. Strapping not as specified for Level A or B.
109. Marking missing, illegible, incorrect, or incomplete for Level A,
Level B, or Commercial.
5. PACKAGING
5.1 Packing. Packing shall be Level A, Level B, or Commercial as specified (see 6.2).
5.1.1 Level A. Reels of like description shall be packed together in
close-fitting boxes conforming to PPP-B-601, Overseas Type, style optional, in
quantities not to exceed the weight limitations of the box. The reels shall
be secured within the box in a manner to prevent movement or damage. Box
closure and strapping shall be in accordance with the appendix to the box
specification. Strapping shall conform to QQ-S-781, Class 1, Type I or IV,
size as applicable. Unless otherwise specified (see 6.2), strapping shall be
Finish A.
5.1.2 Level B. Reels of like description shall be packed together as specified in 5.1.1, except boxes shall be Domestic type. As an alternate, boxes conforming to PPP-B-640, Class 2, style optional or PPP-B-636, V3c, V11c, V13C, or V15c, style optional, may be used when the quantity to be packed does not exceed the gross weight or size limitation of the box specification. Box closure and strapping shall be in accordance with the appendix to the applicable box specification.
5.1.3 Commercial. Reels shall be packed in accordance with MIL-STD-1188.
5.2 Marking.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business