MIL-DTL-16377J(SH)
ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IES)
IES LM-15
-
IESNA Guide for Reporting General Lighting Equipment Engineering
Data for Indoor Luminaires
IES LM-79
-
Approved Method: Electrical and Photometric Measurements of Solid-
State Lighting Products
IES LM-80
-
Approved Method: Measuring Lumen Maintenance of LED Light
Sources
IES TM-21
-
Projecting Long Term Lumen Maintenance of LED Light Sources
(Copies of these documents are available online at www.ies.org.)
SAE INTERNATIONAL
SAE-AMS2175
-
Castings, Classification and Inspection of
SAE-ARP4392
-
Lighting, Aircraft Exterior, Night Vision Imaging System (NVIS)
Compatible
SAE-ARP5825
-
Design Requirements and Test Procedures for Dual Mode Exterior
Lights
(Copies of these documents are available online at www.sae.org.)
UNDERWRITERS LABORATORIES INC. (UL)
UL 486A-486B
-
Wire Connectors
UL 496
-
Lampholders
UL 844
-
Standard for Luminaires for Use in Hazardous (Classified) Locations
(Copies of these documents are available online at www.comm-2000.com.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with
the applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.3.
3.3 Type III replacements for type I and type II fixtures. Type III luminaires may function as a replacement for
fluorescent (Type I) and incandescent (Type II) lighting systems and shall meet the same specifications identified in
the applicable slant sheet. Type III luminaires are not limited to being replacements for Type I and Type II fixtures.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business