MIL-DTL-16377J(SH)
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers fluorescent, incandescent lighting and solid state lighting (SSL)
(see 6.12.4) luminaires and associated parts for legacy replacement and new luminaire development fixtures (lights)
and associated parts, used for detail and general illumination on naval ships and submarines.
1.2 Classification. Lighting fixtures are of the following types and classes, as specified (see 6.2).
1.2.1 Types.
Type I Fluorescent.
a.
Type II Incandescent.
b.
Type III Solid state.
c.
1.2.2 Classes.
Class 1 Detail illumination.
a.
Class 2 General illumination.
b.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
FED-STD-595/16492
-
Gray, Gloss (Light Gray)
FED-STD-595/17875
-
Miscellaneous, Gloss (White)
FED-STD-595/17925
-
Miscellaneous, Gloss (White)
FED-STD-595/26270
-
Gray, Semigloss (Haze Gray)
COMMERCIAL ITEM DESCRIPTIONS
A-A-50552
-
Fittings for Cable, Power, Electrical and Conduit, Metal, Flexible
A-A-59125
-
Terminal Boards, Molded, Barrier Screw and Stud Types and Associated
Accessories
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and
Systems, Requirements for
MIL-E-917
-
Electric Power Equipment Basic Requirements
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business