MIL-DTL-16377/14B(SH)
NOTES:
1.
Material shall be ¼ inch thick, clear acrylic plastic, Type CLEAR-1 of MIL-DTL-24191.
2.
Two long window securing screw assemblies shall be installed in accordance with 3.7.6.3 of
MIL-DTL-16377 except that the louver frame shall be inserted between leather washer and captive bushing.
3.
Notches shall be filed as shown in accordance with 3.7.6.4 of MIL-DTL-16377.
4.
Drill 0.191-inch diameter hole and counterbore opposite side 0.323-inch diameter, 0.050-inch deep. Break
sharp edges on the inside surface on all holes.
Break sharp edges 1/64 inch around entire window.
5.
6.
The inside surface shall be finished white as shown in accordance with 3.8.4.1 of MIL-DTL-16377.
7.
When required, one Type VI label shall be applied on the outside surface in accordance with 3.9.1.8.6 of
MIL-DTL-16377.
8.
The louver assembly shall be finished white in accordance with 3.8.4.2 of MIL-DTL-16377.
FIGURE 6. Window assembly, clear and white, directional, for symbols 79.1 and 79.2.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business