MIL-DTL-5904E
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of materiel is to be performed by
DoD or in-house contractor personnel, these personnel need to contact the responsible packaging
activity to ascertain packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. The type C-1 lights (classes I, II, and III) covered by this specification
are intended for use as an elevated runway marker light for outlining runways not over 300.0 feet
in width under all weather conditions. The 100 W class III light is not intended for use with
red/green lenses normally used in threshold light applications.
6.2 Ordering data.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Class required (see 1.2).
c. When first article is required (see 3.1).
d. Color of filters desired and if filters should be provided with the lights (see 3.4.3 and
3.5.1.2).
e. Whether lamps should be furnished (see 3.4.4).
f. Engineering data describing optical performance tests to be used by the contractor
(see 4.2.1 and 4.4.3).
g. Packaging requirements (see 5.1).
6.3 First article test samples. One complete white light, two 180º red filters and two
180º green filters will be required as first article samples to be subjected to the first article tests
to determine compliance with the requirements of this specification. The point of inspection for
these tests will be specified.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business