MIL-DTL-5904E
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.2.2 Other government drawings. The following other government drawing forms a
part of this document to the extent specified herein. Unless otherwise specified, the issues are
those cited in the solicitation or contract.
DRAWING
FEDERAL AVIATION ADMINISTRATION (FAA)
AC 150/5345-26
- FAA Specification for L-823 Plug and Receptacle,
Cable Connectors
(Copies of this document are available online at https://www.faa.gov/ or from the Federal Aviation
Administration, 800 Independence Avenue, SW, Washington, DC 20591.)
2.3 Non-government publication. The following document forms a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
SAE INTERNATIONAL
SAE AS25050
- Colors, Aeronautical Lights and Lighting
Equipment, General Requirements for
(Copies of this document are available from https://www.sae.org/ or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
testing in accordance with 4.2 and 6.3. Production shall not be started until the contractor has
furnished evidence that the sample has passed the first article tests.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business