MIL-DTL-16377J(SH)
APPENDIX A
APPENDIX A
CERTIFICATION/DATA REPORT TECHNICAL CONTENT REQUIREMENTS
A.1 SCOPE
A.1.1 Scope. This Appendix covers information that should be included in the certification/data report when
specified in the contract or order. This Appendix is not a mandatory part of the specification. The information
contained herein is intended for guidance only.
A.2 CERTIFICATION CONTENT
A.2.1 Certification of drawings acceptance. A prerequisite to submission of the first article for inspection
should be provision of satisfactory evidence to the contracting activity that the Naval Sea Systems Command
(NAVSEA) (see 6.6) has reviewed and accepted the manufacturing drawings for the fixture, light, or part to be
furnished under this specification. The contractor should provide drawing acceptance procedures, drawings, and
certification data sheets in accordance with the data ordering documents included in the contract or order, and as
A.2.1.1 Drawing acceptance procedures. Two sets of prints of the manufacturing drawings for the fixture,
light, or part followed by two sets of prints of the certification data sheet should be provided for review. Acceptance
should be based upon the completeness of the drawing and other data submitted by the contractor conclusively
providing proof of proper performance of the fixture, light, or part in accordance with this specification and the
applicable specification sheet. Drawing acceptance should be obtained in writing.
A.2.1.1.1 Submission of revised drawings. When a drawing is not accepted, submission of a revised drawing
should be accomplished. In addition, NAVSEA may require other drawings and documents for reference.
A.2.1.1.2 Changes. The contractor should make no changes in any accepted drawing, as they will require
re-approval by NAVSEA. If changes are required, revised drawings should be submitted as specified in A.2.1.1.
55
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business